Cloud Computing Company In Delhi

IDEAS FOR PEOPLE WHO WANT MORE

Products SAN Switch SAN Switch Brocade G610 Switch

Brocade G610 Switch

SAN Switch
Key Features
  • Affordable storage switch that redefines simplicity and flexibility.
  • High throughput, low latency demands of critical applications with flash-ready performance.
  • Seamless transition to next-generation NVMe flash arrays without a disruptive rip and replace. 
  • Demand from 8 to 24 ports, to support an evolving storage environment.
  • Powers up from 16 Gbps to 32 Gbps 
  • Increases resiliency by automatically discovering and recovering from common networking problems. 
 
 

 

System Architecture

Fibre Channel ports

Switch mode (default): 8-, 16-, and 24-port configurations (8-port increment through Ports on Demand [PoD] icense); E_Ports, F_Ports, M_Ports, and D_Ports
Brocade Access Gateway default port mapping: 16 F_Ports, 8 N_Ports

Scalability

Full-fabric architecture with a maximum of 239 switches

Certified maximum

6,000 active nodes; 56 switches, 19 hops in Brocade Fabric OS ® fabrics; larger fabrics certified as required

Performance

Fibre Channel: 4.25 Gbps line speed, full duplex; 8.5 Gbps line speed, full duplex; 14.025 Gbps line speed, full duplex; auto-sensing of 4 Gbps, 8 Gbps, 16 Gbps, and 32 Gbps port speeds

ISL trunking

Frame-based trunking with up to eight 32 Gbps ports per ISL trunk; up to 256 Gbps per ISL trunk Exchange-based load balancing across ISLs with DPS included in Brocade Fabric OS

Aggregate bandwidth

768 Gbps end-to-end full duplex

Maximum fabric latency

Latency for locally switched ports is ≤ 900 ns (including FEC)

Maximum frame size

2,112-byte payload

Frame buffers

2,000 dynamically allocated

Classes of service

Class 2, Class 3, Class F (inter-switch frames)

Port types

F_Port, E_Port, M_Port, D_Port (ClearLink Diagnostic Port) on 24 SFP+ ports Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port

Data traffic types

Fabric switches supporting unicast

Media types

32 Gbps: Brocade G610 requires Brocade hot-pluggable SFP+, LC connector; 32 Gbps SWL, LWL
16 Gbps: Brocade G610 requires Brocade hot-pluggable SFP+, LC connector; 16 Gbps SWL, LWL, ELWL
Fibre Channel distance subject to fiber-optic cable and port speed

USB

One USB port for system log file downloads or firmware upgrades

Fabric services

Monitoring and Alerting Policy Suite (MAPS); Flow Vision; Brocade Adaptive Networking (Traffic Isolation, QoS); Fabric Performance Impact (FPI) Monitoring; Slow Drain Device Quarantine (SDDQ); Brocade Advanced Zoning (default zoning, port/WWN zoning, broadcast zoning, peer zoning, target-driven zoning); Dynamic Fabric Provisioning (DFP); Dynamic Path Selection (DPS); Brocade Extended Fabrics; Enhanced BB credit recovery; FDMI; Frame Redirection; Frame-based Trunking; FSPF; Brocade ISL Trunking; Management Server; NPIV; NTP v3; Registered State Change Notification (RSCN); Reliable Commit Service (RCS); Simple Name Server (SNS); Read Diagnostics Parameter (RDP), VM Insight

 

 

Management

Supported management software

HTTP, SNMP v1/v3 (FE MIB, FC Management MIB), SSH; Auditing, Syslog; Brocade Advanced Web Tools; Brocade Network Advisor SAN Enterprise or Brocade Network Advisor SAN Professional/Professional Plus; Command Line Interface (CLI); SMI-S compliant; Administrative Domains; trial licenses for add-on capabilities

Security

DH-CHAP (between switches and end devices), FCAP switch authentication; HTTPS, IPsec, IP filtering, LDAP with IPv6, OpenLDAP, Port Binding, RADIUS, TACACS+, User-defined Role-Based Access Control (RBAC), Secure Copy (SCP), Secure RPC, Secure Syslog, SFTP, SSH v2, SSL, Switch Binding, Trusted Switch

Management access

10/100/1000 Mbps Ethernet (RJ-45), in-band over Fibre Channel, serial port (RJ-45) and one USB port

Diagnostics

monitoring, power monitoring, RAStrace logging, and Rolling Reboot Detection (RRD)

 

Mechanical

Enclosure

Back-to-front airflow (non-port-side intake); power from back, 1U

Size

Width: 428.8 mm (16.88 in.) Height: 42.9 mm (1.69 in.) Depth: 306.6 mm (12.07 in.)

System weight

5.75 kg (12.67 lb) with one integrated power supply, without transceivers

 


 

Environment

Operating environment

Temperature: 0°C to 40°C/32°F to 104°F Humidity: 10% to 85% (non-condensing)

Non-operating environment

Temperature: -25°C to 70°C/-13°F to 158°F
Humidity: 10% to 90% (non-condensing)

Operating altitude

Up to 3,000 m (9,842 ft)

Storage altitude

Up to 12 km (39,370 ft)

Shock

Operating: Up to 20 G, 6 ms half-sine
Non-operating: Half sine, 33 G 11 ms, 3G axis

Vibration

Operating: 0.5 g sine, 0.4 grms random, 5 Hz to 500 Hz
Non-operating: 2.0 g sine, 1.1 grms random, 5 Hz to 500 Hz

Heat dissipation

24 ports at 215 BTU/hr

 

 

Power

Power supply

Base switch includes a single, fixed power supply with four integrated system cooling fans

AC input

90 V to 264 V

Maximum input current

2.2 A

Input line frequency

47 Hz to 63 Hz

Power consumption

76.52 W with all 24 ports populated with 32 Gbps SWL optics 55.83 W for idle configuration (all optics loaded but not initialized)

 

 

 

System Architecture

Fibre Channel ports

Switch mode (default): 8-, 16-, and 24-port configurations (8-port increment through Ports on Demand [PoD] icense); E_Ports, F_Ports, M_Ports, and D_Ports
Brocade Access Gateway default port mapping: 16 F_Ports, 8 N_Ports

Scalability

Full-fabric architecture with a maximum of 239 switches

Certified maximum

6,000 active nodes; 56 switches, 19 hops in Brocade Fabric OS ® fabrics; larger fabrics certified as required

Performance

Fibre Channel: 4.25 Gbps line speed, full duplex; 8.5 Gbps line speed, full duplex; 14.025 Gbps line speed, full duplex; auto-sensing of 4 Gbps, 8 Gbps, 16 Gbps, and 32 Gbps port speeds

ISL trunking

Frame-based trunking with up to eight 32 Gbps ports per ISL trunk; up to 256 Gbps per ISL trunk Exchange-based load balancing across ISLs with DPS included in Brocade Fabric OS

Aggregate bandwidth

768 Gbps end-to-end full duplex

Maximum fabric latency

Latency for locally switched ports is ≤ 900 ns (including FEC)

Maximum frame size

2,112-byte payload

Frame buffers

2,000 dynamically allocated

Classes of service

Class 2, Class 3, Class F (inter-switch frames)

Port types

F_Port, E_Port, M_Port, D_Port (ClearLink Diagnostic Port) on 24 SFP+ ports Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port

Data traffic types

Fabric switches supporting unicast

Media types

32 Gbps: Brocade G610 requires Brocade hot-pluggable SFP+, LC connector; 32 Gbps SWL, LWL
16 Gbps: Brocade G610 requires Brocade hot-pluggable SFP+, LC connector; 16 Gbps SWL, LWL, ELWL
Fibre Channel distance subject to fiber-optic cable and port speed

USB

One USB port for system log file downloads or firmware upgrades

Fabric services

Monitoring and Alerting Policy Suite (MAPS); Flow Vision; Brocade Adaptive Networking (Traffic Isolation, QoS); Fabric Performance Impact (FPI) Monitoring; Slow Drain Device Quarantine (SDDQ); Brocade Advanced Zoning (default zoning, port/WWN zoning, broadcast zoning, peer zoning, target-driven zoning); Dynamic Fabric Provisioning (DFP); Dynamic Path Selection (DPS); Brocade Extended Fabrics; Enhanced BB credit recovery; FDMI; Frame Redirection; Frame-based Trunking; FSPF; Brocade ISL Trunking; Management Server; NPIV; NTP v3; Registered State Change Notification (RSCN); Reliable Commit Service (RCS); Simple Name Server (SNS); Read Diagnostics Parameter (RDP), VM Insight

 

 

Management

Supported management software

HTTP, SNMP v1/v3 (FE MIB, FC Management MIB), SSH; Auditing, Syslog; Brocade Advanced Web Tools; Brocade Network Advisor SAN Enterprise or Brocade Network Advisor SAN Professional/Professional Plus; Command Line Interface (CLI); SMI-S compliant; Administrative Domains; trial licenses for add-on capabilities

Security

DH-CHAP (between switches and end devices), FCAP switch authentication; HTTPS, IPsec, IP filtering, LDAP with IPv6, OpenLDAP, Port Binding, RADIUS, TACACS+, User-defined Role-Based Access Control (RBAC), Secure Copy (SCP), Secure RPC, Secure Syslog, SFTP, SSH v2, SSL, Switch Binding, Trusted Switch

Management access

10/100/1000 Mbps Ethernet (RJ-45), in-band over Fibre Channel, serial port (RJ-45) and one USB port

Diagnostics

monitoring, power monitoring, RAStrace logging, and Rolling Reboot Detection (RRD)

 

Mechanical

Enclosure

Back-to-front airflow (non-port-side intake); power from back, 1U

Size

Width: 428.8 mm (16.88 in.) Height: 42.9 mm (1.69 in.) Depth: 306.6 mm (12.07 in.)

System weight

5.75 kg (12.67 lb) with one integrated power supply, without transceivers

 


 

Environment

Operating environment

Temperature: 0°C to 40°C/32°F to 104°F Humidity: 10% to 85% (non-condensing)

Non-operating environment

Temperature: -25°C to 70°C/-13°F to 158°F
Humidity: 10% to 90% (non-condensing)

Operating altitude

Up to 3,000 m (9,842 ft)

Storage altitude

Up to 12 km (39,370 ft)

Shock

Operating: Up to 20 G, 6 ms half-sine
Non-operating: Half sine, 33 G 11 ms, 3G axis

Vibration

Operating: 0.5 g sine, 0.4 grms random, 5 Hz to 500 Hz
Non-operating: 2.0 g sine, 1.1 grms random, 5 Hz to 500 Hz

Heat dissipation

24 ports at 215 BTU/hr

 

 

Power

Power supply

Base switch includes a single, fixed power supply with four integrated system cooling fans

AC input

90 V to 264 V

Maximum input current

2.2 A

Input line frequency

47 Hz to 63 Hz

Power consumption

76.52 W with all 24 ports populated with 32 Gbps SWL optics 55.83 W for idle configuration (all optics loaded but not initialized)

 

Related Products